|
Initialization State: Introduction. Once the Access Terminal (AT) is powered on by its user, it enters the Initialization State. Here, it:
1-Acquires the system.
2-Acquires the strongest available Pilot.
3-Synchronizes with the Control Channel cycle.
4-Acquires the System Time.
The Access Terminal then Transisitons to the IDLE state where it monitors the Control Channel to collect System Parameters, Access Parameters and various Configuration Parameters.
Previous Next
S2K 856-A: 1XEV-DO: Packet Data Call Processing - 5 minutes in the Life of a 1xEV-DO Terminal.
By Dr. Simo and Space 2000. Available August 2005
|
|
